Cryonite Unit

The Cryonite unit consists of several parts: 

• trolley (for the gas cylinder)
• hose (high pressure, steel reinforced)
• gun
• earthing clamp and conductor
• additional tools

The individual parts of the unit are designed to work together, letting the operator work efficiently, while doing treatments in different surroundings.

The gun is first and foremost the holder for the nozzle, which produces the patented Cryonite snow, without which efficiency would be close to nil.

The gun is also designed for ergonomy and reach. As the method relies upon getting the snow to hit the pest, the nozzle needs to be angled this way and that, to blow the snow into all hiding places. The snow has generally a good penetration, both regarding small openings (narrow slits), and depth (long pipes). Even so, a more accurate targeting / angling allows for even better penetration.

Some examples on ergonomy:

One of the usual hiding places are cracks between wall and floor. The gun can be extended, allowing for an upright working position. And the nose can be bent to point in the desired direction - here usually fairly horizontal, straight into the crack.

When working under benches and other furniture / machinery, it can be extended down, and pointed up under them, again allowing for a more upright working positiion.

The hose is about 4 metres long, allowing for a good working length / radius, before having to move the trolley.

If you need to protect very sensitive electronic equipment (as for when, see our Manual), the earthing clip is easy to attach and also has a long connecting cable, allowing for a good action radius.

The trolley easily carries the gas cylinder, containing some 7-10 kgs of gas. This size gives a good working time, before having to change it. It also has holders for all the rest: gun, hose, tools, earthing, making a coherent package.